View PUMZ1_4571309.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DISCRETE SEMICONDUCTORS
DATA SHEET
dbook, halfpage
MBD128
PUMZ1 NPN/PNP general purpose transistors
Product data sheet Supersedes data of 2002 May 6 2004 Oct 15
NXP Semiconductors
Product data sheet
NPN/PNP general purpose transistors
FEATURES * Low current (max. 100 mA) * Low voltage (max. 40 V) * Reduces number of components and boardspace. APPLICATIONS * General purpose switching and amplification.
handbook, halfpage
PUMZ1
PINNING PIN 1, 4 2, 5 3, 6 emitter base collector DESCRIPTION TR1; TR2 TR1; TR2 TR2; TR1
6 5 4
5
4
DESCRIPTION Two independently operating NPN/PNP transistors in an SC-88; SOT363 plastic package.
6
TR2 TR1 1 2 3 1 Top view
MAM341
MARKING TYPE NUMBER PUMZ1 Note 1. * = -: Made in Hong Kong. * = t: Made in Malaysia. * = W: Made in China. ORDERING INFORMATION MARKING CODE(1) F*Z
2
3
Fig.1 Simplified outline (SC-88) and symbol.
PACKAGE TYPE NUMBER NAME PUMZ1 - DESCRIPTION plastic surface mounted package; 6 leads VERSION SOT363
2004 Oct 15
2
NXP Semiconductors
Product data sheet
NPN/PNP general purpose transistors
LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS - - - - - - Tamb 25 C - -65 - -65 Tamb 25 C; note 1 - MIN. MAX.
PUMZ1
UNIT
Per transistor; for the PNP transistor with negative polarity VCBO VCEO VEBO IC ICM IBM Ptot Tstg Tj Tamb Per device Ptot Note 1. Device mounted on an FR4 printed-circuit board. THERMAL CHARACTERISTICS SYMBOL Per device Rth(j-a) Note 1. Device mounted on an FR4 printed-circuit board. thermal resistance from junction to ambient note 1 416 K/W PARAMETER CONDITIONS VALUE UNIT total power dissipation 300 mW collector-base voltage collector-emitter voltage emitter-base voltage collector current (DC) peak collector current peak base current total power dissipation storage temperature junction temperature operating ambient temperature open emitter open base open collector 50 40 5 100 200 200 200 +150 150 +150 V V V mA mA mA mW C C C
2004 Oct 15
3
NXP Semiconductors
Product data sheet
NPN/PNP general purpose transistors
CHARACTERISTICS Tamb = 25 C unless otherwise specified. SYMBOL PARAMETER CONDITIONS - - - 120 - - - IC = 2 mA; VCE = 12 V; f = 100 MHz 100 MIN.
PUMZ1
MAX.
UNIT
Per transistor; for the PNP transistor with negative polarity ICBO IEBO hFE VCEsat Cc collector-base cut-off current emitter-base cut-off current DC current gain collector-emitter saturation voltage collector capacitance TR1 TR2 fT Note 1. Pulse test: tp 300 s; 0.02. transition frequency IE = 0 A; VCB = 30 V IE = 0 A; VCB = 30 V; Tj = 150 C IC = 0 A; VEB = 4 V IC = 1 mA; VCE = 6 V IC = 50 mA; IB = 5 mA; note 1 IE = ie = 0 A; VCB = 12 V; f = 1 MHz 1.5 2.2 - pF pF MHz 100 10 100 - 200 mV nA A nA
2004 Oct 15
4
NXP Semiconductors
Product data sheet
NPN/PNP general purpose transistors
PACKAGE OUTLINE
PUMZ1
Plastic surface-mounted package; 6 leads
SOT363
D
B
E
A
X
y
HE
vMA
6
5
4
Q
pin 1 index
A
A1
1
e1 e
2
bp
3
wM B detail X Lp
c
0
1 scale
2 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 1.1 0.8 A1 max 0.1 bp 0.30 0.20 c 0.25 0.10 D 2.2 1.8 E 1.35 1.15 e 1.3 e1 0.65 HE 2.2 2.0 Lp 0.45 0.15 Q 0.25 0.15 v 0.2 w 0.2 y 0.1
OUTLINE VERSION SOT363
REFERENCES IEC JEDEC JEITA SC-88
EUROPEAN PROJECTION
ISSUE DATE 04-11-08 06-03-16
2004 Oct 15
5
NXP Semiconductors
Product data sheet
NPN/PNP general purpose transistors
DATA SHEET STATUS DOCUMENT STATUS(1) Objective data sheet Preliminary data sheet Product data sheet Notes 1. Please consult the most recently issued document before initiating or completing a design. PRODUCT STATUS(2) Development Qualification Production DEFINITION
PUMZ1
This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification.
2. The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. DISCLAIMERS General Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Quick reference data The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding.
2004 Oct 15
6
NXP Semiconductors
Customer notification This data sheet was changed to reflect the new company name NXP Semiconductors, including new legal definitions and disclaimers. No changes were made to the technical content, except for package outline drawings which were updated to the latest version.
Contact information For additional information please visit: http://www.nxp.com For sales offices addresses send e-mail to: salesaddresses@nxp.com
(c) NXP B.V. 2009 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
Printed in The Netherlands R75/05/pp7 Date of release: 2004 Oct 15 Document order number: 9397 750 13967

▲Up To Search▲

Price & Availability of PUMZ1

	To Download PUMZ1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .